+86 18791176186
yunhuati@163.com
- The purpose of using coatings in titanium stamping forming!
Titanium plate is similar to other materials in the forming process. When necessary, coatings and lubricants need to be applied to certain parts of the mold on the surface of raw materials and pre for...
- Cold rolled TC4 titanium alloy tube technology!
The TC4 titanium pipes on the market are mainly high-strength thick walled pipes produced by hot extrusion or oblique perforation methods. This warm rolling process requires an improvement on the trad...
- What are the advantages of titanium screws and titanium fasteners?
As a raw material element for the production of titanium screws, titanium is a highly active metal. Compared with traditional stainless steel, titanium screws have better flexibility and oxidation res...
- Titanium rod manufacturer introduces methods for identifying counterfeit and inferior products!
Many titanium rod manufacturers want to buy high-quality titanium rods when purchasing them, but how to distinguish the quality of titanium rods? Baoji titanium rod manufacturers teach us how to disti...
- What are the main areas of tungsten and molybdenum products?
What are the main areas of tungsten and molybdenum products?
- Titanium rod | Practical titanium alloy!
1、 Introduction to Titanium RodTitanium rod is a titanium alloy containing a certain amount of titanium element. Titanium alloy has a small specific gravity, good thermal strength, good weldability, ...
- Concept and Application of Tungsten Molybdenum Metal!
Tungsten and molybdenum are two high-temperature resistant metals, and together they represent an industry known as the refractory metal industry. Other refractory metals include niobium, zirconium, t...
- Tell me some common sense about titanium!
Thermal conductivity of titaniumIt is said that metals have fast thermal conductivity. Titanium is a type of metal, and its thermal conductivity is naturally not slow, but relatively speaking, it is m...
- Tungsten and molybdenum product manufacturers introduce rotating molybdenum target materials!
The use of molybdenum target material is very significant. Its raw material is in powder form. In the hands of the master, through a series of operation methods, it is turned into molybdenum target ma...
- Chemical method for removing vanadium impurities from titanium tubes!
The vanadium impurities in the titanium tube are mainly VOCl3 and a small amount of VCI4, which cause the TC4 titanium alloy tube to appear yellow. The purpose of refining vanadium is not only to deco...
